How to program the Philips Universal Remote for a Samsung TV? [Replied 2022] - Droidrant (2023)

In order to program your Philips universal remote control to your Samsung Smart TV, you need to look up your codes. If you haven't already, your remote control should have a list of device codes on the back. To pair your remote with your TV, press and hold the Device button and select your Samsung TV from the list of devices. Once the TV is selected, press the CHAN+ button to change the channel.

To store a previously programmed code, press the STOP button on the remote control. Press and hold the device button for a few seconds. The LED light should illuminate, indicating the remote is paired with the device. Once the code is saved, press the device button again to confirm the connection. If successful, your device should turn on.

Now that you've paired your remote control with your Samsung TV, you're ready to start programming. If you don't already have a Samsung TV, Philips universal remotes let you control just about anything. Codes vary so it's important to check your manual to make sure it matches your TV. Then try programming your remote for a different make or model. After programming the remote control for a different brand, try the same procedure for the other device.

How do I pair my Philips remote control with my TV?

A Philips universal remote can be programmed to operate virtually any AV component or video device. The pairing procedure varies by make and model, but there are some general steps that need to be followed. If you're not sure which buttons work, you can always try a different code from the same brand. Follow the steps below to pair your remote control with your Samsung TV. Then turn on your Samsung TV and enjoy all the benefits of a Philips universal remote control.

Turn off your TV. Press the PROG button and wait a few seconds. Press the REVERSE button repeatedly for about two seconds. Once you've done this, your TV should turn back on and pair your Philips remote control with your device. Press the OK or Enter button when you have finished pairing the two devices. Then you can enjoy your new remote control. And don't forget to let us know how it went, leave a comment below.

What are the remote control codes for a Samsung TV?

If you have a Samsung TV, you probably have one of the following remote controls: AA59-00581A. This remote control is compatible with LG, Onkyo and Saab devices. If you're not sure which one to buy, read our guide below. If not, here's what you need to know about this remote control. This remote control is compatible with many brands and models of electronic devices, including Samsung.

To enter search mode, press the SETUP button on your remote control. The LED flashes twice. After entering the code, press the TV button once. If the LED flashes twice, you have entered the correct code. If not, you can try again by pressing the TV button again. To find out which codes work for your Samsung TV, check your remote control manual or online. Remember to have the model number handy; that makes the search easier.

Once you have the right remote control, you can now use it to control your Samsung TV. This universal remote control is compatible with most Samsung TVs. This remote works with universal remotes that require a 3 or 4 digit code. Samsung TV codes are easy to remember and can be found on the manufacturer's website. You can also find videos on YouTube to help you program your universal remote control. You can find these codes on this page.

What is the pairing button on the Philips remote control?

If you're not sure what to do next, search online for the correct codes for your Philips universal remote control. This will help you program your remote for the different devices you have. So if you want to use the Philips universal remote control for a specific device, just press the corresponding button on the Philips remote control to turn it on. After you have successfully programmed the Philips universal remote control to your device, you can proceed to program your other devices.

Philips universal remote controls are compatible with almost all your devices. Once you've bought one, you can start programming it to work with your favorite devices. To do this, press and hold the appropriate button until a light starts flashing. Press the appropriate button and wait for it to flash. When you find the right button, press the UP or DOWN button until the TV changes the channel. You should now be able to program your Philips remote control for your TV.

Why isn't my Philips universal remote working?

If your Philips universal remote control isn't responding to commands, it might be time to replace the batteries. Sometimes a hardware or software issue can prevent the remote control from working properly. In this case, follow the steps below to fix the problem. Also look for external electrical devices that may be interfering with the remote control signal. Sometimes this can be as simple as an electrical reset. In this case, you can follow the steps in Solution 4 to fix the problem.

First you need to find the manufacturer code of your remote control. You can usually find this number on the back of the remote control. You can look up the code on your remote control by consulting the documentation or by visiting the Philips Universal Remote Code Finder website. Once you find the code, you can enter it on the remote's keypad. This will scan all available codes on the remote. If you have more than one code, try saving them to a file.

How do I connect my universal remote control to my TV?

If you want to program your Philips universal remote to control your Samsung TV, follow the steps below. You can also operate your Samsung TV with another universal remote control. Philips universal remotes work with virtually any device, including your Samsung TV. To configure, press the Find Code button on the remote control and enter the code that came with the device. If you have more than one device, you can try a different brand's code.

If you have multiple devices, you can narrow down the list by tagging them with a specific tag. You can also press the power button to turn on the device, hold the device button for a few seconds and type the first tick. Repeat the process for the other devices. If you are having trouble programming your Samsung TV universal remote, you can try a different brand remote to find your device code.

What is the 4 digit code for my Samsung TV?

You can find the 4-digit code for your Samsung TV on the label of your TV or in the user manual. If you have a universal remote control, you can also find it on the back of your TV. You might also find it on a product label if your TV is smart. If you can't find it, look for the code online. If all else fails, you can also try to fix your TV with a universal code.

To use the remote control to find the remote control code, you must point the remote control at the TV. The LED on the remote will blink while you hold it. Then press and hold the SETUP, Power, Channel Up, or Volume button until the LED flashes twice. You can also enter the code with a universal remote by pressing and holding a button on the device.

Is there a compatibility list for Philips universal remote controls?

Thinking about buying a new universal remote control for your TV? Then you are exactly right here. This remote can control dozens of different brands of TVs and streaming devices, including Blu-ray and DVD players. The Philips remote control can be used with a variety of different devices, including the most popular brands. You'll find that you have the same basic programming steps for most of these devices, so you can figure out which model will work with your current setup.

One of the biggest benefits of buying a Philips universal remote is the ability to control multiple devices. Unlike the traditional remote control, this universal remote control is compatible with almost all available brands of electronic devices. The built-in code lookup feature can help you determine which remote control codes work with your specific devices. You can use this list to find the exact codes for your device and program it with your Philips universal remote control.

Learn more here:

1.)Smart TVs from Samsung

2.)Official Samsung Support

3.)Samsung TVs - Wikipedia

4.)Samsung TV models